manualshive.com logo in svg

Printronix P9000 Series, Руководство пользователя, Страница: 35 / 334

Поделиться
Скачать
Printronix P9000 Series Скачать руководство пользователя страница 35

2-17

Operation

2.

Press MENU DOWN to display the current forms length in lines.

3.

Press NEXT or PREV to increase or decrease the forms length in 1-line increments, reĆ

spectively. When the appropriate value is displayed, save it as described below.

4.

Press ENTER to select the displayed forms length.

5.

Press CLEAR to return to OFFLINE READY.

6.

Simultaneously press MENU UP and MENU DOWN to lock the printer configuration.

7.

Set the top of form according the the instructions on page 2-9.

8.

Close printer cover and place the printer on line.

Selecting Print Mode

During normal operation, the message display indicates the printer is on line and what print

mode is currently selected; for example:

ON LINE

DP AT 10 CPI

1.

Place the printer off line and raise the printer cover.

2.

Simultaneously  press  MENU  UP  and  MENU  DOWN.  ENTER  SWITCH  NOT

LOCKED will be displayed briefly.

3.

Press PRINT MODE; the currently selected print mode will be displayed.

4.

Press NEXT, PREV, or PRINT MODE to cycle through the various print mode options.

The following print mode options are available:

Data Processing (DP) at 10, 12, 13.3, 15, and 17.1 cpi
Correspondence (NLQ) at 10, 12 and 15 cpi
High Speed A (HS) at 10, 12, 13.3, 15, and 17.1 cpi
High Speed B (HSB) at 10, 12, 13.3, 15 and 17.1 cpi
High Speed C (HSC) at 10, 12, 13.3, 15 and 17.1 cpi
OCR-A and OCR-B at 10 cpi

NOTE: The control panel actually displays 13 or 17 cpi when 13.3 or 17.1 cpi, respectiveĆ

ly, is selected.

5.

When the desired print mode is shown on the display, press the ENTER switch.

6.

Press CLEAR to return the printer to off line status. The display will read OFFLINE

READY.

7.

Simultaneously press MENU UP and MENU DOWN to lock the printer configuration.

8.

Close printer cover and place the printer on line.

Содержание P9000 Series















































































































































































































































































































































Отзывы:

Нет отзывов