Printronix Integrated Network Interface Card, Руководство пользователя

Страница: 281 / 310

Nothing Prints
277
Nothing Prints
•
Can you
ping
the NIC from your Unix station? If not, please
refer to “NIC Cannot Be Found On The Network” shown above.
•
Is the NIC able to communicate with the attached printer? To
test this, you can:
1.
Telnet
to the print server (e.g.,
telnet 192.75.11.9
)
and log in as
root
.
2.Enter the command
start fox prn
.
3.Execute
stop prn
right after starting the test.
4.This test will send the same text line over and over to the
attached printer.
•
Is the job getting stuck in the Unix host queue? If so, check that
the printer is online. If it is, there is a configuration error on the
Unix station, so creating a new print setup may be needed.
•
Is the control panel showing any activity to indicate it is
receiving data? If so, but there is nothing printing, check if a
manual form feed is needed. Also, ensure that the printer can
support the type of job coming through.
•
Do all jobs fail or just certain ones? For example, is it possible
that jobs from a certain application are the only ones to fail? If
so, check the type of data it sends to make sure it matches the
printer emulation. Check the application printer configuration
for mistakes.
•
If you are using System V, was the spooler restarted?