Printek FormsPro 4300, Руководство по эксплуатации

Страница: 54 / 105

Advanced Control Panel Features
Page A-4
Setup: SECURITY
This menu offers a security feature for environments where it is not desirable for the operator
to be able to modify either the values of form related functions, interface related functions, or
option related functions. With the security feature enabled, the operator will be able to
inspect or view the values of the various functions, but will not be able to change or edit these
values.
The security menu is the fourth setup menu. To enter it, first place the printer offline. Then
press and hold the setup button for approximately 8-1/2 seconds until “Setup: SECURITY”
appears on the display and the bell beeps four times. Note that while you hold the button,
“Setup: FORMS”, “Setup: INTERFACE”, and “Setup: OPTIONS” are displayed as you pass
through those menus. At this time you are able to view and/or edit the values for the security
functions listed below. Although you may select functions with either the FUNCTION UP or
FUNCTION DOWN buttons, they are listed here in the order of function up.
Function Possible Values Description
Forms: Edit*, View, or Init Selects whether an operator can
modify, only look at, or initialize
function values in the forms menu.
Edit allows the operator to look at
and/or modify form function values.
View allows the operator to only
look at form function values. No
values can be modifed.
Init causes all form function values
to be set to the factory default
settings for all forms. When this
completes, the security value is set
to Edit.