Printek FormsPro 4300, Руководство по эксплуатации

Страница: 25 / 105

Operation
Page 3-5
For a description of this button while the printer is in the
setup mode, refer to “Introduction to Setup” later in this
chapter.
SETUP This button enters and exits the setup menus that are
used to set parameters for up to ten unique form
configurations, and for setting the parameters required
for the printer to communicate successfully with your
computer. This button and a detailed description of the
features of the setup mode are described in “Introduction
to Setup” which follows.
If you press and hold this button at powerup/reset, the
current setup configuration may be printed. Refer to
“Printing Setup” in the “Using Special Features” section
of this manual.