Printek FormsMaster 8000, Руководство программиста

Страница: 60 / 150

IBM Proprinter Emulation
54
For example, an 11 inch form contains 66 lines at 6 LPI, but 88 lines at 8 LPI. If line spacing is
changed after setting the form length, the physical form length (in inches) will not be changed.
Resets top of form to the current position, so it is wise to be at top of form before setting form length.
Issuing a form feed will guarantee this. Vertical margins are cleared.
Example: The following escape sequence will set form length to 66 lines. At 6 LPI, this will result in
a form length of 11 inches.
Escape sequence: ESC C 66
Hexadecimal: 1B 43 42
Set Form Length in Inches ESC C NUL n
Sets the form length to n inches. 1
≥
n
≥
37. Maximum form length is 37.9 inches. Invalid form lengths
will be ignored. Overrides the “Form Length” value in the forms menu.
Resets top of form to the current position, so it is wise to be at top of form before setting form length.
Issuing a form feed will guarantee this. Vertical margins are cleared.
Example: The following escape sequence will set form length to 11 inches, regardless of what line
spacing is set.
Escape sequence: ESC C NUL 11
Hexadecimal: 1B 43 00 0B
Form Feed FF
Causes the current line to be printed, and then advances the paper to the top of the next form. If a top
margin is set, printing will continue at the top margin. Setting “Host FF at TOF” to “No” in the
interface setup menu allows a form feed to be ignored if the paper is already at top of form. If “Auto
CR” is set to “On” in the interface setup menu, a carriage return will also be performed.
Control code: FF
Hexadecimal: 0C
Set Top of Form ESC 4
Sets top of form to the current position.
Escape Sequence: ESC 4
Hexadecimal: 1B 34
Horizontal Tabs
Default horizontal tab stops are set at every eighth column, i.e. column 9, 17, 25, 33, 41, etc. The
default tab stops are associated with columns, not absolute physical positions. Changing character
spacing will change the physical position of the default tab stops.
User defined horizontal tab stops are associated with absolute physical positions, not with columns.
The tab stops are set relative to the current character spacing, but subsequent changes in character
spacing will not affect the physical position of the tab stops (except that the position will be rounded
up to the closest character boundary).