Printek FormsMaster 8000, Руководство программиста

Страница: 42 / 150

Epson FX Emulation
36
The right margin is exclusive. For example, a right margin at column 75 allows a character to be
printed in column 74, but not in column 75.
The leftmost column is column zero. The right margin must be right of the left margin and
≥
13.6
inches. Invalid right margins will be ignored. Overrides the “Right Margin” value in the forms menu.
Example: The following escape sequence will set a right margin 7.5 inches from the left edge of the
form, if character spacing is currently 10 cpi. For a standard 8.5 inch wide form, this would result in a
one inch right margin.
Escape Sequence: ESC Q 75
Hexadecimal: 1B 51 4B
Vertical Margins
Printing is allowed only within the top and bottom margins. Exceeding the bottom margin will set the
current line to the top margin of the next form.
Set Perforation Skip ESC N n
Sets the perforation skip distance to n lines at the current line spacing. 1
≥
n
≥
255. If line spacing is
changed after setting the skip distance, the skip distance will not be changed.
The skip distance is split between the top and bottom margins, so the perforation will be centered in
the resulting white space. The specified skip distance must be less than the form length, or the
command will be ignored. Perforation skip is canceled by ESC O, ESC C
n or ESC C NUL n .
Overrides the “Top Margin” and “Bottom Margin” values in the forms menu.
Example: The following escape sequence will set a two inch perforation skip distance, if the current
line spacing is 6 lpi. This will result in a one inch top and bottom margin.
Escape Sequence: ESC N 12
Hexadecimal: 1B 4E 0C