Pringo P232 Plus Скачать руководство пользователя страница 2

 1

English

Safety Information

Before you use, operate, dissemble the product, or change or remove any parts, components or materials of the product, please ensure 

that you carefully read this P232 User's Manual ("Manual") and the safety instructions described below, and strictly follow the instructions 

of such safety information. 

If there is any question regarding the product and you feel the information provided in the Manual does not provide adequate assistance 

in terms of solving the problem you are facing, please contact our customer service staff immediately for professional assistance with 

troubleshooting.

For  your  own  safety,  HiTi  Digital,  Inc.  (”HiTi”)  strongly  recommends  the  use  of  HiTi  manufactured  and/or  designated  consumables, 

accessories, or peripherals of the product ONLY. HiTi DOES NOT GUARANTEE, implied or expressly, the compatibility of the product with 

any  non-HiTi  made  consumables,  accessories,  or  periphrals.  Using  any  non-HiTi  made/designated  consumables,  accessories,  or 

peripherals which are intended for the product only may damage the product, and/or causes personal injuries and property damages to 

the user and/or any third parties.

DO  NOT ALLOW  MINORS  UNDER  THE AGE  OF  12  TO  USE,  OPERATE,  HANDLE  OR  STRORE  THE  PRODUCT AND/OR  ITS 

BATTERY AND CHARGER PACK. 

ALL USE, OPERATION, HANDLING OR STORING OF THE PRODUCT, ITS BATTERY AND CHARGER PACK, AND ANY OTHER 

CONSUMABLE OR ACCESSORIES BY ADOLESCENTS ABOVE 12 SHALL BE CARRIED OUT IN THE PROPER PRESENCE AND 

CONSTANT  SUPERVISION  OF  FULLY  CAPABLE  LEGAL  GUARDIANS.  THE  MANUAL AND ALL  THE  SAFETY  INSTRUCTIONS 

THEREIN  SHALL  BE  READ  TO  SUCH  ADOLESCENTS  PRIOR  TO  ANY  USE,  OPERATION,  HANDLING  OR  STORAGE  OF 

PRODUCT OR ITS BATTERY AND CHARGER PACK.

PLEASE BE ADVISED THAT WE WILL NOT BE RESPONSIBLE FOR ANY INJURIES OR DAMAGES IN PERSON OR PROPERTY IN 

ANY FORM, DIRECT OR CONSEQUENTIAL, INCURRED DUE TO USER'S FAILURE TO FOLLOW STRICTLY THE INFORMATION 

AND SAFETY INSTRUCTIONS PROVIDED IN THE MANUAL, OR DUE TO ANY USE OF PRODUCT FOR UNINTENDED PURPOSES.

The printer may cease printing for a while when temperature is high. 

Notice

Hereby  HiTi  declares  that  Pringo  P232  is  in  compliance  with  the  essential  requirements  and  other  relevant  provisions  of  Directive 

1999/5/EC.

FCC Notice

You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s 

authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These 

limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, 

uses  and  can  radiate  radio  frequency  energy  and,  if  not  installed  and  used  in  accordance  with  the  instructions,  may  cause  harmful 

interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this 

equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, 

the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

This  equipment  complies  with  the  FCC/IC  radiation  exposure  limits  sent  forth  for  uncontrolled  equipment  and  meets  the  FCC  radio 

frequency (RF) Exposure Guidelines in Supplement C to OET62 and RSS-102 for the IC radio frequency (RF) Exposure rules. This 

equipment has very low levels of RF energy that is deemed to comply without maximum permissive exposure evaluation (MPE). But it is 

desirable  that  it  should  be  installed  and  operated  with  at  least  20cm  or  more  between  the  radiator  and  person's  body  (excluding 

extremities: hands, wrists, feet, and ankles).

This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 

(1)this device may not cause interference, and 

(2)this device must accept any interference, including interference that may cause undesired operation of the device.

Содержание P232 Plus











Отзывы: