13
Adjusting the screen display
( When using an analog signal )
MODE SELECT Menu
Notes:
- Depending on the resolution of the input signal,
even if menu options can be selected, the display
may not change.
- To choose a menu option:
d
/ MODE button
- To complete adjustment: MENU button
OSD H-POSITION (OSD horizontal position)
The position of the OSD Menu can be moved to the
left and right. (
ef
buttons )
OSD
V
-POSITION (OSD vertical position)
The position of the OSD Menu can be moved up and
down. (
ef
buttons )
SCALING (Level of scaling)
The sharpness of the image can be adjusted.
(
ef
buttons )
Note:
- When the display mode is set to less than 1280
×
1024 pixels, the display is enlarged to cover the
whole screen (i.e. The side ratio of the display may
change).
LANGUAGE
You can choose the language used in OSD Menu.
1. Press the
f
button.
The Language Selection Menu will be displayed
on the screen
2. Use the
d
/ MODE button to choose a language.
3. Press the MENU button.
Language Selection Menu will disappear.
MODE SELECT
OSD H-POSITION
OSD V-POSITION
SCALING 0
LANGUAGE
INPUT-1 ANALOG
1280x1024 V:60Hz H:64.0kHz
