8
E
N
G
L
I
S
H
STARTUP
Start your PC and then turn your monitor on. (Power button) The Green LED should light up.
Adjust the image to meet your requirements (Contrast & Brightness) if you desire. See
below for descriptions on how functions work.
BASIC SETUP
Automatic Image Adjustment
You can adjust the image settings (such as brightness, contrast, image position, phase, etc.)
manually or by using the LCD monitor’s automatic image adjustment feature. This will adjust
the image parameters to their optimal settings for the current graphics mode. Press
AUTO
button to launch the automatic adjustment.
Selecting the Input Signal (INPUT)
You can switch the signal source directly from D-Sub (
Analog 1
) to DVI (
Analog 2
/
Digital
)
by pressing the
INPUT
button
Shortcut for adjusting contrast and backlight.
You can adjust contrast and backlight directly by pressing the
-
or
+
buttons while the OSD
menu is not displayed.
Press the
INPUT
button
and then the
+
button to increase the
contrast/ backlight, or press
-
only to decrease the contrast/ backlight.
