Princess 321200, Инструкция по эксплуатации

Страница: 14 / 80

14
EN
Regularly check the appliance for possible •
damage.
Regularly check the water reservoir for •
possible leakage.
Clean the appliance after each use: •
- Empty the water reservoir.
- Remove limescale and other contaminants
from the soleplate with a damp cloth and
a non-abrasive cleaning agent.
- Clean the housing of the iron with a soft,
damp cloth.
- Clean the housing of the steam generator
with a soft, damp cloth.
Descaling the appliance (fig. A & B)
The appliance must be descaled regularly.
If the appliance must be descaled, use a
descaling agent that is suitable for steam irons.
Special descaling agents for steam irons are
available from our service station.
Note: Princess will not be responsible for any
damage caused by descaling agents.
Damage caused by not regularly descaling the
appliance is not covered by the guarantee.
Caution!
- Be careful when descaling the appliance to
prevent damage to furniture or clothing.
- Do not use vinegar or vinegar concentrate
to descale the appliance.
- Do not use citric acid to descale the
appliance.
Loosen the cover (18) from the water •
reservoir (13).
Rinse the water reservoir (13) with clean •
water.
Fill the water reservoir (13) with a descaling •
agent that is suitable for steam irons. Mix
the descaling agent with water as instructed
on the package of the descaling agent.
Tighten the cover (18) to the water reservoir •
(13).
Insert the mains plug into the wall socket. •
Switch on the iron (1) using the on/off switch •
(2).
Switch on the steam generator (4) using •
the on/off switch (5).
Steam ironing
Fill the water reservoir (13) with water. •
Place the iron (1) with the soleplate (15) •
onto the iron holder (16).
Insert the mains plug into the wall socket. •
Switch on the iron (1) using the on/off •
switch (2). The on/off indicator (3) comes
on. The iron starts heating.
Switch on the steam generator (4) using •
the on/off switch (5). The on/off indicator
(6) comes on. The steam generator starts
to heat the water.
If the water has reached the required •
temperature, the ”steam ready” indicator
(10) will come on.
Set the temperature using the temperature •
control dial (7). The temperature indicator
(8) remains on during the process.
If the temperature indicator (8) goes off, •
the soleplate (15) has reached the required
temperature. The iron is ready for use.
To supply a shot of steam during use, press •
the steam button (9).
If you interrupt the process, place the iron •
(1) with the soleplate (15) onto the iron
holder (16).
After use, place the iron (1) with the •
soleplate (15) onto the iron holder (16).
Switch off the steam generator (4) using •
the on/off switch (5).
Switch off the iron (1) using the on/off switch •
(2).
Remove the mains plug from the wall socket. •
Allow the appliance to cool down completely. •
Cleaning and maintenance
Warning!
- Before cleaning or maintenance, remove
the mains plug from the wall socket and
wait until the appliance has cooled down.
- Do not immerse the appliance in water or
any other liquids for cleaning.
Caution!
- Do not use aggressive or abrasive cleaning
agents to clean the appliance.
- Do not use sharp objects to clean the
appliance.