Princess 321010, Руководство пользователя

Страница: 4 / 15

4
EN
Congratulations!
You have purchased a Princess product. Our aim
is to provide quality products with a tasteful
design and at an affordable price. We hope that
you will enjoy this product for many years.
Description (fig. A)
Your
321010
Princess steam press has been
designed for steaming and pressing
garments and fabrics to remove creases. The
appliance is suitable for indoor use only. The
appliance is suitable for domestic use only.
Fig. A1
1. On/off switch
2. Control panel
3. Steam shot button
4. Handgrip
5. Ironing board
6. Pressing plate
7. Locking knob (pressing plate)
8. Water reservoir
9. Mains cable storage compartment
10. Pressing cushion
11. Measuring cup
12. Spray bottle
Fig. A2
13. On/off indicator (POWER)
14. Heating indicator (HEATING)
15. Steam shot indicator (SPRAY)
16. Standby indicator (WAIT)
17. Function keys/indicators
17a. NYLON key/indicator
17b. SILK key/indicator
17c. WOOL key/indicator
17d. COTTON key/indicator
17e. LINEN key/indicator
Initial use
Clean the appliance. Refer to the section •
”Cleaning and maintenance”.
Use
Filling the water reservoir (fig. B & C)
Before you proceed, we need you to pay
attention to the following notes:
- Before filling the water reservoir, switch off
the appliance, remove the mains plug from
the wall socket and wait until the appliance
has cooled down.
Before you proceed, we would like you to
focus your attention on the following notes:
-
Do not use the appliance without water
in the water reservoir.
- Do not exceed the maximum mark when
you fill the water reservoir.
- It is recommended to fill the water reservoir
with a mixture of 50% tap water and 50%
distilled water in order to prevent the
formation of excessive limescale.
- Only use cold water to fill the water reservoir.
-
Do not use carbonated water or other
liquids to fill the water reservoir.
Place the appliance on a stable and flat •
surface.
Turn the locking knob (7) into the direction
•
of the unlock symbol to unlock the pressing
plate (6).
Raise the pressing plate (6).
•
Pull the water reservoir (8) out of the •
appliance.
Note: Do not attempt to completely remove
the water reservoir from the appliance.
Remove the cap (18). •
Fill the water reservoir (8) with the required •
amount of water. Use the measuring cup (11).
Mount the cap (18).
•
Push the water reservoir (8) into the •
appliance.
Hints for use (fig. A - C)
Before you proceed, we would like you to
focus your attention on the following notes:
-
If the appliance is left switched on with the
pressing plate in the lowered position for
10 seconds, a beep will sound to indicate
that the heating function is deactivated.
Raise the pressing plate to reactivate the
heating function.
- If the appliance is left switched on but
unused with the pressing plate in the
raised position for 15 minutes, a beep will
sound to indicate that the heating function
is deactivated.