Princess auto EHS350A, Руководство по эксплуатации и запасным частям

Страница: 39 / 59

●
Slip the rope rotor onto the starter post (6) and turn it back and forth a little
until the anchor loop of the rewind spring engages.
●
Replace the pawl (9) in the rope rotor.
●
Press the spring clip (8) onto the starter post and over the peg of the pawl with
a screwdriver.
Note: The spring clip must point counter-clockwise.
●
To tension the rewind spring, first guide the rope through the notch on the
edge of the rope rotor and form a loop, use it to turn the rope rotor 4-5 times
counter-clockwise.
●
Then hold the rope rotor tight, pull out the twisted rope and untangle it.
●
Release the rope rotor, slowly let go of the starter rope so that it is wound up
on the rope rotor.
●
Refit the flywheel/starter cover (1) and screw in the four screws (2).
4. Replacing pawl (Ref. Fig. 13)
38