Princess auto EHS350A, Руководство по эксплуатации и запасным частям

Страница: 38 / 59

electrodes are badly eroded. (A BPMR7R type spark plug is recommended
for replacement.)
●
Refit the plug boot and make sure it is snugly connected to the spark plug.
3. Replacing starter rope (Ref. Fig. 13)
The Starter rope may need to be replaced when frayed or broken.
●
Unscrew the screws (2) on the flywheel/starter cover (1) and remove the
cover from the engine unit.
●
Remove the spring clip (8), remove the rope rotor (7) with pawl (9).
●
Using a screwdriver, unscrew the screw plug (3) on top of the starter grip,
remove the starter rope (4) out of the grip.
●
Put a new rope down through the grip and the rope guide bushing (5), make a
simple knot at the end of the rope and screw in the screw plug (3)
●
Thread the rope through the rope rotor (7) (enter from the hole on the rotor
groove) and secure it with a simple knot.
●
Wind the rope around the rope rotor (7) clockwise until there is a length of
300mm left unwound..
37