Bench Grinder Stand
4
For technical questions call 1-800-665-8685
8343030
V 2.8
Fig. 2
MOUNTING A GRINDER
1. If the grinder (or other stationary power tool) has rubber
feet, remove them. This will allow the grinder to sit flat on
the pedestal stand.
2. Place the grinder on top of the pedestal stand, aligning
the mounting holes of both the grinder and the pedestal
stand. Ideally, the front of the grinder should be square
with the front of the mounting surface.
3. Secure the grinder with the hardware described in its
owner’s manual. If the mounting hardware is not listed,
use a hex bolt (#6) not exceeding 7/16 in. in diameter,
two flat washers (#9), a lock washer (#7) and a hex nut
(#8). (Fig. 2)
TROUBLESHOOTING
Contact Princess Auto Ltd. for a solution if the stand does not function properly or parts are missing. If unable to do
so, have a qualified technician service the stand.
PARTS LIST
#
DESCRIPTION
QTY.
1.
Fixed Plate
1
2.
Coolant Tray
1
3.
Support Pole
1
4.
Base
1
5.
Hex Key
1
6.
Hex Bolt
4
7.
Lock Washer
4
8.
Hex Nut
4
9.
Flat Washer
8
10. Plastic Hanger
1
11. Small Screw
1
12. Small Washer
1
The Princess Auto Guarantee
No sale is final until you're satisfied. We guarantee to make it right.
We will repair, replace or refund any product to your satisfaction.
