Princess auto 8130239, Руководство пользователя

Страница: 2 / 9

Specifications
• 2.5 HP, 15A, 3,450 RPM motor
• No load speed: 2,700 RPM
• 10" continuous rim wet diamond blade for tile cutting
• Includes submersible water pump with filter, stand with wheels, and water reservoir with drain
• 45° mitre block and 90° rip guide
Cutting capacities:
• 24" max. rip cutting length
• 16" max diagonal cutting length
• 3" max cutting depth
• 16" x 11" table
• 37-1/2" x 18-1/2" x 3" deep water tray
• 2.6 to 3.12 GPM max pump flow
Safety Information
WARNING:
When using tool, basic safety precautions should always be followed to reduce the risk of personal
injury and damage to equipment.
Read all instructions before using this tool!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use machines or power tools in damp or wet locations. Do not expose to
rain. Keep work area well lighted. Do not use electrically powered tools in the presence flammable gases or
liquid.
3. Keep children away. Children must never be allowed in the work area. Do not let them handle machines, tools, or
extension cords
4. Store idle equipment. When not in use, tools must be stored in a dry location to inhabit rust. Always lock up tools
and keep out of reach of children.
5. Do not force tool. It will do the job better and more safety at the rate for which it was intended. Do not use
inappropriate attachments in an attempt to exceed the tool capacity.
6. Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of a large
industrial tool. There are certain applications for which this tool was designed to perform. Do not modify this tool
and do not use this tool for a purpose for which it was not intended.
7. Dress properly. Do not war loose clothing or jewellery as they can be caught in moving part. Protective,
electrically non-conductive clothes and non-skid footwear are recommended when working. Wear restrictive hair
covering long hair.
8. Use eye and ear protection. Always wear impact resistant safety goggles.
9. Do not over reach. Keep proper footing and balance at all times. Do not reach over or across running machines.
10. Maintain tools with care. Keep tools harp and clan for better and safer performance. Follow instructions for
lubricating and changing accessories. Inspect tool cords periodically and if damaged, have them repaired by and
authorized technician. The handles must be kept clean, Dry and free from oil and grease at all times.
11. Disconnect power. Unplug tool when not in use,
12. Remove adjusting keys and wrenches. Check that keys and adjusting wrenches are removed from the tool or
machine work surface before plugging it in.
13. Avoid unintentional starting. Be sure that the switch is in the off position when not in use and before plugging in.
14. Stay alert. Watch what you are doing. Use common sense. Do not operate any tool when you are tired.