4
ASSEMBLY INSTRUCTIONS
This is one of our heaviest tables. We recommend that at least two adults work
together to assemble this table.
The table will be assembled upside down and then turned over onto its legs once completed.
Turning this table over will require at least
three
strong adults.
We suggest that you use the bottom carton as a clean flat work area to protect the table.
Start by removing all the parts from the box and verifying that you have all of the listed parts as
shown on the Parts Identifier list. Carefully cut or tear the four corners of the box so that the bottom
of the box can be used as your work surface.
STEP 1: ATTACHING INNER LEGS
1. Inner Leg Brackets (P3) have been pre-installed on your table.
2.
To attach the Inner Leg (P4) to Leg Brackets (P3) place Spacer “A” (A8) between Inner Legs and Leg
Brackets. Using the 8mm Hex Head Bolt (A1) insert through
Leg Bracket
(P3), outside Spacer
“A” (A8),
inner Leg (P4), inner Spacer
“A”(A8) and secure with 8mm Locking Nut (A7).
Do not over tighten
.
(
“Do not over tighten” means that there should be no gaps between hardware on screw but there
should be free movement)
See 1 & 1A.
3. Notice the space
“A” direction shown on
1A
.