Prince Castle DHB2PT-33DQ Series, Руководство по эксплуатации, Страница: 3 / 14

3
Product Holding Bin
DHB2PT-33
DQ
Series
Operation
REG
BKFT
MENU
ENTER
TRANSFER
Turn power On/Off switch to ON position.
Allow 30 minutes for
heaters to reach operating
temperature. The
Temperature Display will
show temperature as unit
warms up to the operating
temperature.
Power On/Off Switch
Load pan covers (if used) onto pan racks and
insert racks into the unit.
EGGS
EGGS
MENU
ENTER
BKFT
REG
Press all PAN Buttons
The PAN DISPLAYS will show the
assigned product name.
If no product is assigned, the display
will be dim and show “----”. Pressing
the PAN button will not activate the
timer if “----” is displayed. Pressing
PAN button when product name is
displayed will start timing cycle.
BKFT (Breakfast) or
REG (Regular Menu)
will be lit depending on
pre-programmed menu.
EGGS
EGGS
MENU
ENTER
BKFT
REG
LED Timing Status
When LED is steady
RED , load product
and press the PAN
Button.
(steady) = Ready for product
(flashing) = Discard product
(steady) = Oldest product, use first
(flashing) = Cook more product
(steady) = Newer product, use green first
(flashing) = Cook more product
REG
BKFT
MENU
ENTER
TRANSFER
If only one pan is active for a
product, the LED will turn from
RED to GREEN.
If no other pan is active for a
product, the LED for the first
pan loaded will turn from RED
to GREEN.
The LED for the 2nd pan (3rd
pan, etc.) loaded will turn from
RED to YELLOW.
An LED timer can be stopped
(cancelled) at any time by
pressing and releasing the
corresponding PAN Button.
LED Timers
RED RED
RED
RED
GREEN GREEN
GREEN
GREEN
YELLOW
YELLOW
REG
BKFT
MENU
ENTER
TRANSFER
Discard product
Cook more product
Cook more product
When any of the timer LED’s flash, cook more product or
remove and discard product as indicated.
B
SAUS
BACN
TRANSFER
BACN
SAUS SAUS
6
5
3
1
2
4
Product, along with any remaining time, can be
transferred from one cavity to another as follows:
A. Press and release the TRANSFER
Button. Displays for available bins
are brightly lit. Displays for bins
currently timing, are dimly lit.
B. Press and release the PAN
button of the product to be
moved.
C. Press and release the
TRANSFER button again.
D. Move the product. Press and release
the PAN Button for the new location.
The new location will finish timing
the product. When the transferred
pan timing expires, location will
revert to original menu setting.
WARNING
Hot surfaces.
NOTE: If product transfer is not completed within a pre-programmed
transfer time, the transfer will be cancelled. See your Manager.
GREEN GREEN Flashing
YELLOW YELLOW Flashing
RED RED Flashing
541-553rev C_EN
Printed in USA 10/10 © 20 10