541-531revD-EN
7
Printed in USA 10/10 © 2010
Product Holding Bin
DHB-BK41/43
Changing the Hold and Cook-More Times
TIME
PROD
SET
A. The SET PRODUCT TIME menu is used to change the Hold and Cook-More times.
B. Press and hold the PRINCE CASTLE LOGO button, then immediately press and hold the MENU/ENTER button until the display shows
one of the programming menus.
C. Use the UP or DOWN Arrow button to scroll to the
SET PROD TIME
menu.
NOTE: Hold Times are specified by Burger King Corporation. Prince Castle does not endorse changing hold times unless instructed by Burger
King Corporation.
1
PRINCE CASTLE LOGO Button
MENU/ENTER Button
TIME
EGGS
SET
A. Press and release the MENU/ENTER button to enter the Set
Product Time menu. The display will show, for example,
SET
EGGS TIME
.
B. Use the UP or DOWN Arrow button to scroll through the list of
products. When the desired product is displayed, press the
MENU/ENTER button to select it.
2
Refer to the Product Menu Details on page 11 for a list of products and
their corresponding display names.
NOTE: Holding the UP or DOWN Arrow button for longer than 2
seconds will cause the product list to automatically scroll up or down.
4
A. The display will now show current Cook-More time. Use the UP
or DOWN Arrow button to scroll to the desired Cook-More time.
NOTE: Cook-More time cannot be increased to more than the Hold
time minus one minute.
B. When the desired Cook-More time is displayed, press the MENU/
ENTER button to save it.
2:10
EGGS
HOLD
A. The display now shows the current Hold time.
3
NOTE: Hold time cannot be reduced to less than the Cook-More time
plus one minute.
B. Use the UP or DOWN Arrow button to scroll to the desired Hold time.
When the desired Hold time is displayed, press the MENU/ENTER
button to save the desired Hold time.
⇑
⇑
A. The display will show
SET PROD TIME
. Repeat Steps 2 – 4
for any other product.
B. Press and release the PRINCE CASTLE LOGO button at any
time to exit the Program Mode and return to the Run Mode.
5
NOTE: If the MENU/ENTER button has not been pressed to save
any changes, the program will revert to the original values.
