Prince Castle DCFT-BK, Руководство по эксплуатации

Страница: 4 / 15

Printed in USA 10/13 © 2013 4 525-500revB-EN
Dual Continuous Feed Toaster
DCFT-BK
STATUS
READY
Turn unit ON.
Turn the On/Off switch located
opposite the display panel to
ON. The Prince Castle DCFT
screen will appear in the LCD
display for 3 seconds.
BURN/ELECTRICAL SHOCK HAZARD!
Platen sections are HOT and can cause severe burns or
severe shock. Keep hands and objects out of the toaster
unit! Failure to exercise caution may result in serious injury!
Turn the unit off, unplug it and let it cool down completely
before touching or working on internal apparatus.
Observe conveyor. Conveyors have been adjusted at
the factory. However, if their motion appears jerky or
you hear a “skipping” sound, the gears may have been
disturbed. See Conveyor Adjustment for details.
Operation
1
2
4
STATUS
WARMING...
3
Wait through Warm-Up.
During warm-up, the LCD dis-
play will read “STATUS” and
“WARMING…”.
Warm-Up time is about 10-15
minutes.
WARNING
Watch for READY status.
When ready temperature is
reached, the LCD display will
read “STATUS” and “READY”.
5
Observe conveyor.
Conveyors have been
adjusted at the factory.
However, if their motion
appears jerky or you
hear a “skipping”
sound, the gears may
have been disturbed.
See Conveyor Adjust-
ment for details. STATUS
READY
6
7
Choose the compression
adjustments.
Dial the two front compression
adjustment knobs for the prod-
ucts part (Regular Crown, etc.)
that you will be toasted in the
front of the unit. Dial the two
rear compression adjustment
knobs for the product part
(Regular Heel, etc.) that you
will be toasting in the rear
of the unit.
Begin continuous feeding.
Feed product into top of DCFT,
sending the correct product
parts down the front and rear of
the unit. The sides to be toast-
ed should face the platen.
Toasted product will exit at the
base of the DCFT.
Rear Compression
Adjustment Knob
Front Compression
Adjustment Knob