1.CONNECTION
Your stove is designed to connect directly on to
a 3/8” LH BSP camping gas cylinder using the
specially designed LP Gas hose supplied with
the appliance.
1. Check that the
gas controls
are in the “Off”
position (turned
fully clockwise).
2. Take the stove
connector head
of the hose and
attach to the
gas inlet on the
appliance, tighten
up using fingers.
3. Attach the other
end of the hose to
the gas cylinder,
tightening using a
spanner.
4. Turn the cylinder
gas valve on in
an anti-clockwise
direction for one
full turn and
then check the
connections for
leaks with soapy
water, if a leak is
detected turn the
cylinder gas valve
“Off” and retighten
all connections
then retest.
OPERATING THE APPLIANCE
1. Gas control
2. Burners
3. Cylinder connection
4. Stove connection
5. Hose
6. Wings
2
2
5
6
6
3
1
1
4
