Instruction Manual ECO FL
5
2.3
Technical Characteristics
Ironing table with heating and suction.
The flat ironing surface is suitable for underpressing seams, linings and ironing small parts such
as collars, cuffs, pockets and T-shirts, shirts, blouses as well. Suitable for garment industries,
workshops and ateliers. It can accommodate one or two ironing bucks.
2.4
Technical Description
Model
Eco FL
Working Surface
130X65 cm (standard)
Standard height
85 cm
Heating Power
1 KW
Suction Power
0.50 HP
Power supply
400V-3ph- 50Hz/60Hz or
230V-1ph- 50Hz/60Hz
3.
General Rules and Warnings
3.1
General rules of using the Ironing Table
For the safe usage of your Ironing Table, please read the following operating instructions
carefully, as listed below:
Install, use and maintain the Ironing Table according to the instructions in this manual.
Otherwise, the manufacturer has no responsibility for the possible failed operation or
safety.
Before connecting the power supply, check that the voltage corresponds to the voltage
indicated on the technical specifications.
Connect the machine only to a power supply that meets the minimum required frequency
and is properly grounded. Do not leave the Ironing Table while it is operating and is on
power without supervision.
Use the Ironing Table ONLY for the intended purpose in accordance with the current
instruction manual and only with the accessories that are provided or that are intended
for this specific Ironing Table. The manufacturer is not liable for any damages resulting
from misuse or wrong use of the Ironing Table.
DO NOT touch the power supply with wet hands.
Do not clean the Ironing Table with corrosive or other damaging materials/chemicals.
Never use the Ironing Table to support any other machine or structure.
It is strictly prohibited to do any kind of welding or alterations on the Ironing Table or
its parts.
It is strictly prohibited to remove any protective device/guards.
It is strictly prohibited to intervene in the control units/circuit boards of the Ironing
Table.
It is strictly forbidden to do any modification to the technical specifications of the
machine (electrical or mechanical) by third persons.
Please contact your dealer or the manufacturer for any malfunction or further information
requests
3.2 Warning marks placed on the Ironing Table
The following attention marks are placed on each ironing table:
