CONFIGURATION
To enter the configuration mode, simultaneously press the
LEFT and
RIGHT
arrow key and hold for three (3) seconds with the unit pow-
ered
ON
.
NOTE:
Eight (8) seconds of inactivity (no keys pressed) will terminate
the configuration menu and exit back to the run menu.
The first item in the configuration menu is the
UNITS
selection. Use
the
LEFT or RIGHT
arrow keys to navigate through all the items in
this menu.
UNITS
Select the unit of measure display after the process value.
FT
= Feet
IN
= Inches
CM
= Centimeters
M
= Meters
%
= Percentage
NONE
= Blank, No Units Displayed
When you are at the item you wish to edit, press the
ENTER
key
and the original value for the item selected will flash. Use the
UP
and
DOWN
arrow keys to change to your desired value and press
ENTER
.
NOTE:
The edited value will not be saved until the
ENTER
key is
pressed.
4
mA
Set the value displayed when the signal value is
equal to 4mA (zero). The default value is zero.
20
mA
Set the value displayed when the signal value is
equal to 20mA (span). The default value is 10.0.
BAR MIN
This value set the level for which all bars on the bar
graph will turn OFF.
BAR
MAX
This value set the level for which all bars on the bar
graph will turn ON.
PRIMEX ™ 13 SP6R-LSC Level Controller User Manual
