Installation Requirements Smart-Sync Analog Clocks
Refer to the Important Safety Instructions before installing, operating or performing maintenance of clocks.
Installation requirements
A Smart-Sync Bridge or Smart-Sync Clock/Timer is within 80 feet (24.3 m) from the clock installation location.
AC-powered analog clock installation guidelines
A socket-outlet is required to be available within 18 in. (45.72 cm) from the clock installation location and should be easily
accessible. Refer to the table below for power specifications.
Model
Input Power
Current Draw
AC-Powered Single-sided
120V~, 47-63Hz
67mA@120V~
AC-Powered Dual-sided
120V~, 47-63Hz
134mA@120V~
AC-Powered clocks are supplied with a power cord with a two-prong plug. The two-prong plug may be removed for a hardwired
(pigtail) installation. Hardwired installation requires a 120V~ power line in a junction box installed by a licensed electrician. Leave
a minimum of 6 in. (15 cm) of cord inside the junction box.
14
Smart-Sync Analog Clock Install Guide
