PLASMA CUTTER
OPERATION MANUAL
SAFETY
Welding and cutting is dangerous to the operator
،
people in or near the working
and surrounding areas, if the equipment is not operated correctly. Therefore the
performance of welding/cutting must only be under the strict and
comprehensive observance of all relevant safety regulations.
WARNING
Electric Shock: Maybe fetal
• Avoid all contact with live components of the welding circuit,
Electrodes and Wires with bare bands. Wear dry gloves before
start welding task.
• Wires with bare bands Keep operator insurance from welding
metal and welding pieces.
Smoke and gas generated while welding or cutting Harmful to
health of people
• keep head distance away from gas.
• Avoid breathing the smoke and gas of welding or cutting.
• keep the working area in good ventilation.
Fire Hazard
• weting sparks, Power cable leakage both can cause the fire.
• Please do not welding in inflammable, its can cause explode.
• Sparks may cause fire, Remove flammable material from the
work place.
• Keep fire extinguisher nearby and have a trained fire person
ready to use it.
ARC light-emission: Harmful to the eyes & skin of people
• Wear a welding helmet, Anti-radiation glass and work clothes
while the welding Operation is performed.
• Keep working area in ventilation.
CYLINDER may explode if damaged.
• Always keep cylinders in an upright position securely chained to
an Undercarriage or fixed support.
• Never allow the electrode, electrode holder or any other
electrically `hot" parts to touch a cylinder
• Keep your face and head away from the cylinder valve outlet
when it to be opening.
Engine fan can hurt the hands
• Do not put your hands near the engine fan.
• Do not attempt to override the governor or idler by pushing on
the throttle Control rods while the engine is running.
ELECTRIC SHOCK can kill.
• Insulate yourself from work and ground using dry insulation.
Make certain the insulation is large enough to cover your full
area of physical.
• Ground the work or metal to be welded to a good electrical
ground.
• Never dip the electrode in water for cooling.
• Turn off input power using the disconnect switch at the fuse box
before working on the equipment.
• Install equipment in accordance with electric standard code.
Symbol
Descripiton
02
