General Information
The GUS 51 is designed to maximize “throw” or “punch” by collimating the light when the beam adjustment knob is
turned clock-wise to the stop, producing an 11 degree beam angle. This setting is called the “Full Spot”, while the
other extreme of the adjustment, called ‘Full Flood” provides near uniform light intensity over a field angle of 80
degrees. This adjustability covers a ratio of 15 to 1 light intensity. Unwanted spill is controlled with barn doors. The
GUS-51 is available in CCTs of 3
2
00 Kelvin and 5
6
00 Kelvin which can be altered with the color frame by adding a gel.
The GUS-51 is made of machined and extruded aluminum and selectively powder coated in distinctive
dark
blue.
Accessories are made of cold ro
l
led steel. Standard luminaires are equipped with detachable 10’ long power cords.
Each 120 volt cord is equipped with Edison 3 prong connectors. Other voltage models are shipped with optional plug
specified. A fused power inlet receptacle is supplied for most models. Adjacent fixtures may be powered with this
connector so long as the load does not exceed 4 amps. (fig. 2)
Fuse is fast acting type 217, 6 Amp. The switch controls
the power to the one fixture. Power is indicated when the switch is lit.
M
anufactured in the USA by:
PrimeTime Lighting Systems, Inc.
•
4124 Billy Mitchell Dr.
•
Addis
on, TX 7500
1
(214)-393-5998
PrimeTimeLighting.com
10529 Olympic Drive • Dallas, TX 75220 • ofc 214.393.5998 • fax 214.393.5999
PrimeTimeLighting.com
10529 Olympic Drive • Dallas, TX 75220 • ofc 214.393.5998 • fax 214.393.5999
