manualshive.com logo in svg

Primes CUBE, Руководство по эксплуатации

Поделиться
Скачать
Primes CUBE Скачать руководство пользователя страница 26

35,0(6

Cube

26

Revision 01/2019 EN

13.1.1  Safety instructions

DANGER

Severe eye or skin injury due to laser radiation
If the protective window is not correctly positioned, reflections can cause 
directional laser radiation.

X 

Ensure that the new protective window is positioned evenly in the inden-
tation on the O-ring.

CAUTION

Burns due to hot components
After a measurement the absorber below the protective window is hot! 
Unintentional contact during the protective window exchange could lead 
to burns.

X 

Do not replace the protective window directly after a measurement.

X 

Let the device cool down for an adequate period of time. The cooling 
time varies depending on the laser power and the irradiation time.

CAUTION

Cutting hazard
Contamination and fingerprints on the protective window can lead to da-
mage or shattering or splintering of the protective window during measu-
ring operation.

X

 

Only replace the protective window in a dust-free environment.

X

 

Do not touch the protective window.

X

 

When exchanging the protective window, always wear cotton- or powder-
free latex gloves.

Содержание CUBE





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды