PRIMERGY BX600 S3, Руководство по оборудованию

Страница: 122 / 143

122
Chapter 5 CLI
❑
: Parameter
• Backup/restore Control (1_11_1_1)
Sets backup and restore.
Parameter Setting Contents
1. Backup/restore Control - Controls backup and restore.
"• Backup/restore Control (1_11_1_1)" (p.122)
2. View Backup Configuration
- Displays backed up setting information.
3. Auto Restore Enable
❑
enable
❑
disable
Sets whether the backed up setting information will be
automatically restored to the Switch Blade.
If set to "enable", automatic restore is only performed for
Switch Blades newly installed to the chassis. Restored
setting information is saved as a Switch Blade boot file
named "backup_cfg".
Parameter Contents
1. backup Backs up the current settings of the selected Switch Blade.
2. force-restore Force restore the backed up settings to the currently installed Switch Blade.
Force restored settings is saved as a Switch Blade boot file named
"backup_cfg".
+--------------------------------------------+
| |
+--------------------------------------------+
page_1_11_1_1
Switch Backup/restore Control : backup
(1) backup
(2) force-restore
(0) quit
Enter selection or type (0) to quit: