Primera PoINT Publisher, Руководство по началу работы

Страница: 7 / 41

PoINT Publisher: Getting Started
7
3. In the PoINT Publisher program group, click on ”PoINT Publisher
Server”. This starts the program.
Entering a License Key
As long you have not entered a License Key, ”PoINT Publisher
Server” will display a message box after starting the program, which
indicates that an valid License Key has not been entered. The software
will run without a License Key for 7 days with all functions and fea
tures being enabled. Please refer to chapter 4 for information on how
to get and how to enter the License Key.
If after 7 days no valid License Key has been entered PoINT Publisher
changes the functionality to the demonstration mode which means
that the program can be started but recording of discs is disabled.
Configuring PoINT Publisher - Server
When you run “PoINT Publisher Server” the first time after installa
tion you have to configure the software. Later on you may alter the
configuration whenever this is necessary. PoINT Publisher stores and
uses the current configuration until you change it.
You may open the ‘Device Configuration’ dialogue by command ‘Set
tings’ of the ‘Configuration’ menu. When you start ”PoINT Publisher
Server” for the first time, the dialogues are displayed automatically.
1.
Setup the connected hardware.
2. Select recording speed and simulation mode (if required).
Additional settings can be done in the ‘General’, ‘Defaults’ and ‘Auto
loader’ dialogues.
In Windows 2000/XP/2003 PoINT Publisher will automatically disable
the ‘Autorun’ function. You have to reboot the system to make the
changes effective.
The ‘Autorun’ function is disabled in order to prevent Windows from
starting recorded CDs automatically before they are unloaded from
the recorders. Additional information can be found in the Online
Help of PoINT Publisher.
Setting up the connected Hardware
To open the setup dialogues, click on the ‘Setup’ button in the ‘Device
Configuration’ dialogue.