14 Ink Cartridges and Media
4. Loosen Feed Block Knobs and allow the Feed Blocks to
drop onto the inserted envelope (the Feed Blocks are
spring-loaded). Then tighten the Feed Block Knobs. Do not
apply any upward or downward pressure to the knobs as
you tighten them.
NOTE:
If printing narrow envelopes, leave any Feed Block not in use in the
fully raised position so that Feed Block remains out of the way during
the printing operation.
5. Slide
Adjustable Side Guide
toward envelope until there is
about 1/16 space between guide and envelope.
6. Load five additional envelopes one at a time making sure
the leading edge of each envelope is touching the Feed
Block. This creates a staggered effect of the stacked
envelopes.
7. Load remaining envelopes. Fan envelopes before loading
them. Also check for nested envelopes (envelopes that are
underneath the flap of another envelope).
8. Slide the
Material Wedge
into place against the edge of the
envelopes so the second envelope from the bottom is lifted
about 3/4 off the Infeed Tray.
3/4
ep100.qxd 1/27/2000 1:11 PM Page 14
All manuals and user guides at all-guides.com
Содержание EP-100
Страница 4: ...iv All manuals and user guides at all guides com ...
Страница 33: ...All manuals and user guides at all guides com ...
Страница 34: ...All manuals and user guides at all guides com ...
Страница 35: ...All manuals and user guides at all guides com ...