Primera Cyclone C-1000, Руководство пользователя

Страница: 16 / 66

12 Loading Media
4. Load the ribbon onto the Ribbon Supply Spindle . The
dull side of the ribbon should be facing down as it travels
through the print head module.
5. Feed the leading portion of the ribbon through the Print
Head Assembly and up to the Ribbon Rewind Spindle
following the routing as shown in the diagram above. Be
sure that the ribbon travels under the black plastic ribbon
sensor.
6. To secure the ribbon on to the core, manually turn the
rewind spindle twice. You may also choose to use a small
piece of tape to hold the leading portion of the ribbons to
the ribbon core.
7. If the media is already loaded, raise the Head Latch
Support Bracket and close the Head Latch by pushing
downward and close the Side Access Door .
Note: The new empty core of each subsequent roll becomes the next rewind
core.
Ribbon Roll
Ribbon Supply Spindle
Label
Supply
Spindle
Label Path
Ribbon
Rewind
Spindle
Print Head
Assembly
Head Latch
Support Bracket
Head Latch
Ribbon Supply Roll Tape
510172_r1.qxd 3/21/2001 6:25 PM Page 12
All manuals and user guides at all-guides.com
all-guides.com