Primera Bravo XR Series, Руководство пользователя

Страница: 47 / 64

Creating Discs
43
Kiosk Mode
Kiosk Mode will allow you to increase the capacity of your
Publisher from 50 to 100 discs by dispensing finished discs out
the front of the unit instead of dropping them to the output
bin. This allows you to place blank discs in both the input and
output bins doubling your capacity.
The kiosk setting in PTPublisher overrides this setting. Only
set kiosk mode here if you are printing only from an applica-
tion other than PTPublisher.
Print Quality
There are three options for image quality. Keep in mind that
Normal provides the fastest print at lower quality while Best
delivers the best quality at a slower print speed.
Disc Surface Quality
This setting also affects the Quality of the printed image
by altering the color matching profile. Start with the default
setting for fastest printing and the least ink
consumption. If the quality needs improvement, move
to the next highest setting.
Color Matching
Graphic mode is best used for graphical images where
accurate color reproduction is not as essential. Images
printed in this mode will look more vibrant because more ink
is being used to produce them. However, printing images of
people may produce skin tones that have a reddish tint.
Photo mode is best used for photographic images where accu-
rate color reproduction is very essential. Images
printed in this mode will look lighter than those printed
in Photo mode. Skin tones especially will look more
natural in this mode.
NOTE:
Exact color matching of the printed discs to the screen may never
be possible since there are factors that affect this out of the drivers
control. The surface of the disc reacts with the ink in the cartridge to
produce the color. For this reason, when printing the same image to
different brands of discs with different printable surfaces the printed
output can look entirely different.
510951.qxd 11/24/2009 2:25 PM Page 43