Hardware and Software Setup
11
Step 4: Installing the Ink Cartridge
•
With the cover open, press the Power/Ink Button to move
the Ink Cartridge Carrier to the load position.
•
Open the cartridge cover by pressing down on the tab.
•
Remove the ink cartridge from its packaging.
•
Slowly remove the tape covering
the cartridge's print head.
DO NOT TOUCH THE COPPER AREA!
•
Insert the ink cartridge into the carrier,
copper end first and snap the cartridge
cover in place.
•
Close the Publisher's front cover.
Step 5: Aligning the Cartridge
If you are using a PC
the Installer will prompt you to align
the cartridge.
If you are using a Mac
you will be prompted to align the
cartridge before you print for the first time.
Note:
An alignment print is required every time you install a new
cartridge. The software will always prompt you to align the
cartridges. Make sure there is an unprinted disc in the bin for
this alignment.
510967.qxd 8/10/2006 8:28 AM Page 11
