prime3 STF21, Руководство пользователя

Страница: 7 / 22

1. Front fan grille
2. Base
3. Fan blade
4. Control panel with buttons 5. Back grille
6. Motor shaft stem
8. Oscillation lock
7. Motor housing
9. Grille fixing screw
5. Vertical tilt adjustment. To change the fan tilt, hold the appliance in position and tilt the motor body.
1. Before connecting the fan to the power supply, make sure that the button on the control panel is set
to 0. Connect the appliance to the power supply.
2. To start the fan, press one of the buttons on the control panel:
3. Disassembly:
a) Put the back grille (5) on the motor base (pay attention to the notches).
FAN OPERATION
c) Install the fan's front grille (1) by fitting the edge into the hooks on the back grille. Then secure by
tightening the grille's fixing screw (9).
1 - low speed
CLEANING AND MAINTENANCE
Before cleaning and maintenance, make sure that the fan has been disconnected from the power
source.
The fan should be cleaned regularly. Body, posture should be wiped with a dry cloth. The interior
should be blown out with compressed air or vacuumed with a vacuum cleaner.
4. Oscillation. To enable the fan's oscillation movement, press the oscillation lock. To disable the fan's
oscillation movement, lift the oscillation lock.
1. Make sure the appliance is disconnected from the power source.
APPLIANCE ASSEMBLY AND DISASSEMBLY
2. Assembly:
b) Put on the fan blade (3) paying attention to the notch in the stem (6) and the fan blade opening.
3 - high speed
a) Perform the disassembly in the reverse order of the assembly procedure.
2 - medium speed
3. To turn off the fan, press the 0 button on the control panel.
7
STF21