background image

Check point before A/S

In these symptoms

Take measures like this

There is

no power supplied 

in the machine.

Buttons are

not working

There is a message of

Over Temperature.

There is a connection

error message.

Letters in the monitor

has a problem.

 Check the other machines to check black out

 Check the power plug connecon

 Check the power switch on

 Check the disconnecon of the fuse in the fuse box rear part of the product. 

      If the fuse is disconnected you should replace it.

 Open the external case to check connecon of 2 cables from the monitor.

 Open the external case to check connecon of Fan Connector.

 Open the external case to remove foreign materials in fan wings.

 If the Fan does not work aer those measures, please change the fan. 

     Fan is an expendable.

 Check the shade temperature if the temperature is high cooling it and try again.

 Work aer connect the baery and the machine.

 Check the baery voltage. Baery is not working below 30% of standard voltage.

 Reconnect aer clean the sockets.

 Check the connecon of polarity.

 Open the external case to check connection of display board attached from

      monitor and switch board.

 If the switch is not working that can be inner switch problem so contact to

      our customer service for A/S. (2 year warranty)

 Open the external case and reconnect grey Flat Cable connected to 

      display board.

Before you have A/S you should check those things
If you have A/S in these things sum of money would be asked.

If the problem is not solved after those measures,

contact our customer service to get the solution.

Warranty : 

Two years limited & condioned warranty would be supported. If you have any trouble with PRIME products, we will send instrucon 

manuals with pictures for disassemble & assemble guide case by case.

    

Aer Service Commitment :

 

If you have any defecve maer with PRIME products, you should inform us of its symptom with pictures or video earlier to return.  

If we determine that it should be repaired or replaced, then you should disassemble a board to be dispatched via an express mail 

service.   Or, we will send some parts via DHL for replacement by your technician.  The free warranty will be covered for all defecve

maers without any defects by misuse.  Of course, we will pay for all return internaonal freight cost for replacement or repair 

during one year limited free warranty period.   Aer One Year ~ Two years – we will supply for the consuming of troubled consuming

parts with a collect DHL freight cost. 

Содержание BASIC RPT-T300



















Отзывы: