background image

BATTERY REPLACEMENT

Use your finger to pull the battery cover upward. 

Remove the spent battery and insert a new 23AE, 12V 

battery with the “+” polarity mark facing left. Place the 

cover back with the arrow pointing down. Dispose the 

old battery in compliance with all applicable laws. 

Contact your local solid waste authority for detailed 

information.

WARNING:

  DO NOT DISPOSE OF BATTERIES IN 

FIRE. BATTERIES MAY EXPLODE OR LEAK.

•  Non-rechargeable batteries are not to be recharged.

•   Batteries are to be inserted with the correct polarity.

•   Exhausted batteries are to be removed from the  

 product.

FCC REGULATORY STATEMENT

WARNING:

 Changes or modifications not expressly 

approved by the party responsible for compliance could void 

the user's authority to operate the equipment.This device 

complies with part 15 of the FCC rules. Operation is subject 

to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received,  

  including interference that may cause undesired    

 operation.

Note: This equipment has been tested and found to comply 

with the limits for a Class B digital device, pursuant to Part 

15 of the FCC Rules. These limits are designed to provide 

reasonable protection against harmful interference in a 

residential installation. This equipment generates, uses and 

can radiate radio frequency energy and, if not installed and 

used in accordance with the instructions, may cause harmful 

interference to radio communications. However, there is no 

guarantee that interference will not occur in a particular 

installation. If this equipment does cause harmful 

interference to radio or television reception, which can be 

determined by turning the equipment off and on, the user is 

encouraged to try to correct the interference by one or more 

of the following measures: 

1. Reorient or relocate the receiving antenna. 

2. Increase the separation between the equipment and  

  receiver.  

3. Connect the equipment into an outlet on a circuit    

  different from that to which the receiver is connected.  

4. Consult the dealer or an experienced radio/TV  

 

  technician for help.

WARNING:

  CHOKING HAZARD – Small 

Parts. Not for children under 3 years.

!

SAFETY INFORMATION

This is a “GROUNDED” device. The male plug  

contains a ground pin and is only intended  

 

for use with a three-pronged grounded outlet.
This device is for use with a 125 V AC power source. 

125 V AC / 60 Hz

Do not attach a device that exceeds the unit ratings: 

15A / 1875W Resistive

 (General Purpose)

8A / 1000W Tungsten

 (Incandescent)

1/3 HP

 (Horsepower Motor)

IC REGULATORY STATEMENT

Under Industry Canada regulations, this radio 

transmitter may only operate using an antenna of a 

type and maximum (or lesser) gain approved for the 

transmitter by Industry Canada. To reduce potential 

radio interference to other users, the antenna type 

and its gain should be so chosen that the equivalent 

isotropically radiated power (e.i.r.p.) is not more than 

that necessary for successful communication.
This device complies with Industry Canada 

licence-exempt RSS standard(s). Operation is 

subject to the following two conditions: (1) this device 

may not cause interference, and (2) this device must 

accept any interference, including interference that 

may cause undesired operation of the device.

                          WARNING

Risk of Electric Shock

•  Keep children away 

•  Unplug timer before cleaning 

•  Fully insert plug 

•  Do not use near standing water.

Risk of Fire

•  Do not use to control appliances that contain heating 

  elements (cooking appliances, heaters, irons, etc.) 

•  Do not exceed electrical ratings.

                           

AVERTISSEMENT

Risque de choc électrique

• Garder hors de portée des enfants

• Débrancher la minuterie avant de nettoyer

• Insérer complètement la fiche 

• Ne pas utiliser près de l’eau stagnante

Risque d’incendie

• Ne pas utiliser pour contrôler les appareils contenant  

  des éléments chauffants (équipements de cuisine,    

  radiateurs, fers à repasser, etc.)

• Ne pas excéder la capacité électrique

LIMITED 1 YEAR WARRANTY

Prime warrants this product to be free from manufacturing 

defects for a period of one year from the original date of 

purchase (“warranty period”). This warranty is limited to the 

repair or replacement of this product only and Prime is not 

liable for any consequential or incidental damage to other 

products that may be used with this unit.  This warranty is 

effective only if such unit is returned to Prime not later than 

thirty (30) days after the expiration of the warranty period. 

Warranty is void if damage is due to neglect, misuse, 

alteration, modification, improper installation, or repair by 

other than Prime. This warranty is in lieu of all other warranties 

express or implied. Some states do not allow limitations on 

how long an implied warranty lasts or permit the exclusion or 

limitation of incidental or consequential damages, so the 

above limitations may not apply to you. 
It is our experience that a product that fails prematurely due to 

a manufacturing defect in materials or workmanship, will 

generally do so very early in the product’s life cycle, often the 

first or second time the product is used. Products that are 

returned for warranty inspection after months or years of 

continuous reliable service are usually the result of normal 

wear and tear, which is not considered a defect in materials or 

workmanship and therefore is not covered by the warranty.
This warranty gives you specific rights, and you may also have 

other rights which vary from state to state. If unit should prove 

defective within the warranty period, return within the time 

period set forth above prepaid with the original purchase 

receipt to:
Prime Wire & Cable, Inc.   

 

 

 

ATTN: 

Timer 

Warranty 

 

    

280 

Machlin 

Court 

 

    

City of Industry, CA 91789   

 

 

 

Service - (888) 445-9955  •  www.primewirecable.com

RE-SYNCHING THE TRANSMITTER:

If the remote does not turn the devices on or off, the 

receiver and transmitter need to be re-synched. Unplug 

then replug the receiver into a properly grounded outlet. 

Press and hold together both the “OK” and “P” buttons 

until the light on the receiver and the light on the remote 

flash 3 times. Note: these actions must be completed 

within 15 seconds.

03-04102019 YL

Do not plug heaters or heat producing devices such as 

coffee makers, toasters, clothes irons, etc. into the 

Remote Controlled Countdown Timer.

Отзывы: