9
8
DESCRIPTION
PART DESCRIPTIONS
1. Cylinder Cap
- Covers main valve and piston assembly.
2. Handle
- Cushioned handgrip provides comfortable operation.
3. Air Coupling
- Quick-disconnect male coupling allows quick
connection to air hose. Dust cap keeps dirt out when tool is not in
use.
4. Magazine Release
- Opens fastener magazine for quick reloading
fasteners.
5. Cap Tower Door
- Pivots open to permit fast reloading of plastic
caps into high capacity cap tower.
6. Follower Handle
- Pull back to release tension on plastic caps and
open cap tower door.
7. Workpiece Contact
- Spring-loaded contact mechanism prevents
tool from driving a fastener unless tool is pressed down and held
against a work surface.
8. Dual Action Trigger
- Actuates tool when workpiece contact is
depressed against work surface. Permits contact-trip (bump fire) or
trigger-fire operation.
9. Tool Housing
- Contains tool components and provides air storage
for consistent fastener drive.
10. Cap Cylinder -
Air-powered cylinder drives cap feed hook. Automati-
cally feeds plastic caps for rapid cap application.
11. Cap Feed Hook -
Feeds caps into fastening position.
12. Fastener Magazine
- Hold fasteners securely and provides positive
feeding of fasteners into driving position.
13
.
Belt Hook -
Durable tool hook slides on belt. Holds tool securely
and keeps it in reach for greater productivity.
Metric Hex Wrenches
- Included with tool to allow tightening of
metric screws. Keep tools in tool case for periodic tightening of
screws.
Air Tool Oil
- Lightweight oil formulated for use in air tools provides
proper lubrication to o-rings and internal parts.
Safety Goggles
- Provide required eye protection
DESCRIPTION
TOOL PARTS
1
2
4
3
12
5
8
6
11
10
9
7
4
13
