Prime Engineering KidWalk II, Руководство пользователя

Страница: 16 / 18

KidWalk
II Owner’s Manual
16
Removing the client:
To remove the client from the
KidWalk
II
:

Set the wheel locks.

Squeeze the sides of the buckles on the forward
pads on hip assembly (and lateral chest system
if applicable) to release (fig. 21).

Rotate the forward pads upward and outward to
allow clearance to exit.

Remove any other restraint i.e.: Leg Wraps,
Body Wraps, Leg Straps, if applicable.

Lift client forward and out of unit.
REMOVING THE CLIENT TRANSPORT & STORAGE
Fig. 21
Note: Never leave a client unattended while using the
KidWalk
II
Mast Release Pin
Fig. 22
Pull Out
After removing the client:

Make sure that all screws and knobs are tight.

Make sure that all components are still with the system.

Locate and properly store any removable items, i.e. Leg Wraps, Body Wraps, Leg Straps, when
used and store them so they stay with the
KidWalk II .

Store the KidWalk II out of the elements.

Wipe off any spilled fluids or food.

Inspect all moving parts.

Notify your dealer of any item that you see that does not look right.

Due to all of the moving parts on a KidWalk II and the dynamic movement of the system, a
regular visual and hands on manual inspection is recommended.
Transport and Storage:
The
KidWalk
II may be disassembled for ease of
transport or storage.

The mast may be removed by pulling outward on
the release pin and rotating until it is in the lockout
position (fig. 22). The mast can now be lifted off
of the base assembly.

The large wheels may be removed by pressing
inward on the axle pin button while pulling out-
ward on the wheel.
Note: Make sure that any axle spacers remain on
the axle when removing the wheels.