Prime Design FEA-0004, Руководство по сборке

Страница: 8 / 12

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
8
O
pen
Z Post Bolt
¼” x 1.00”
Rear Z Post HRR
Holder Clip
Flat Washer
Rear Z Post
¼” Lock Nut
FEA-0004 BO
X
ASSEMBL
Y INSTR
UCTIONS–LEFT SLIDE RO
TA
TION
6.3
Fit Slide Z Post Bracket
Clamp into Slide groove
6.2
Place Slide Z Post into bottom of Rear Slide Upper
Place Slide Z Post Bracket Clamp into bottom groove,
then slide into Z Post Connector as shown
6.4
Press Slide Release Lever upward
6.5
Extend Slide Upper
6.6
SLIDE UPPER Z POST
SEE QUICK START GUIDE FOR ADJUSTMENTS
6.1
Prepare the parts shown below for assembling the Slide
Z Post onto the bottom of the Rear Slide Rotation, but do
not assemble. Assembly begins at Step 6.6