Prime Design FEA-0004, Руководство по сборке

Страница: 7 / 12

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
7
Torque to
80 in-lbs
4.8
Slide the L Post until parallel
to the Auto Clamp and the
gap between the two is
even from top to bottom
4.7
The Z Post fully seats
into the top slot of the
Mounting Clamps
5.2
Slide the Z Post into the
Mounting Clamp Assembly
5.1
Assemblel the Z Post Mounting Clamp Assembly onto the
Rotation Upper. Do not tighten until Step 5.4.
Z POSTS
SEE QUICK START GUIDE FOR ADJUSTMENTS
Refer to the Quick
Start Guide for Z
Post positioning.
5.3
5.4
Torque to
90 in-lbs
FEA-0004 BO
X
ASSEMBL
Y INSTR
UCTIONS–LEFT SLIDE RO
TA
TION
The Mounting Clamps
seat fully into the top
groove of the Upper