Primare C31.1, Руководство пользователя

Страница: 4 / 7

>
Introduction
2
C H A N G I N G T H E B A T T E R I E S
If the CODE light does not illuminate clearly when you press the CODE button
you should replace the C31’s batteries.
Note: The batteries should be replaced with two alkaline type AAA 1.5 volt
batteries.
To do this proceed as follows:
• Remove the four screws on the back panel of the C31, using a small cross
point precision screwdriver.
• Gently lift up the back panel and put it to one side.
• Remove the two batteries from the battery compartment and replace with
two alkaline size AAA 1.5 Volt batteries, taking care to fit them with the
correct polarity as marked on the inside of the battery compartment.
Do not touch the circuit board as you may damage the sensitive electrical
components.
Please be considerate to the environment when disposing of the old batteries.
•
Replace the back panel and secure it in place using the four screws.