P r i m a L u c e L a b i S r l
E SAT TO u s e r m a n u a l
When the update is completed, please press the OK
button. Now remove USB and power cables from
the ESATTO, wait a few seconds and connect USB
and power cables again. The unit will reboot, then
launch again the FOCUSER Manager software, se-
lect the COM port associated to ESATTO and press
the “Connect” button. Here you can check that the
Firmware version (FW) is correctly updated to the
latest version.
After the firmware update procedure is completed,
you will have to calibrate the ESATTO unit. Please
press the CALIBRATION button and you will see a
new window. With your mouse, please click on the
ESATTO picture that corresponds to the position of
your ESATTO draw tube.
The calibration procedure will start and you will see
the ESATTO draw tube moving, calculating the ma-
ximum and minimum position thanks to the inte-
grated sensors. At the end of the calibration proce-
dure, your ESATTO focuser will be ready for use.
p a g e 2 4
