5a
5a:
With the Handle Rail / Tree Brace / Ladder Jaw assembly
in the same position from
Step 3
, secure Right and Left
Backrest Supports and through right and left Handle
Rails and Tree Brace (already slid inside of Handle
Rail tubes ) using
2-M8x60mm bolts .
NOTE
:
Check to make sure that Tree Brace is correctly
secured (as shown above).
5b:
Attach Foot Platform and Foot Rest to Top Ladder
Section using
2-M8x70mm bolts with 3 washers
NOTE: Center washer should go in between Foot Platform
and Foot Rest on both sides.
Couple together Left Backrest Support and Right Backrest
Support and attach to the rear of Foot Platform using
2-M8x50mm bolts NOTE
:
The top of Left and Right
Backrest supports should bend AWAY from foot platform
(as shown above).
Slide right and left sleeves of Seat Assembly over Left
Back Support and Right Back Support . Rest the base
of the seat pad on top of right and left Handle Rails .
Assembly Instructions Page 2
4
6
5
4
6
5b
Model: PVLS-316
17’ Single Vantage Deluxe Ladder Stand
Customer Service Department 1-866-972-6168
www.primaltreestands.com
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
©2020 (rev. 1/20)
