Ladder Assembly Instructions
Slide Truss Bar into truss bracket (located on the
second lowest rung of Middle Ladder Section .
Secure using
1-M8x45mm bolt .
18
Slide the top of Bottom Ladder
Section into the bottom of
Middle Ladder Section . Lining all
holes up, Insert
M6-Quickclip
completely through the holes of both
ladder sections and out the other side.
Close the quickclips to secure the
ladder sections together. Repeat this
process on the opposite rail.
Slide the top of Middle Ladder
Section into the bottom of Top
Ladder Section . Lining all
holes up, insert
M6-Quickclip
completely through the holes of both
ladder sections and out the other side.
Close the quickclips to secure the
ladder sections together. Repeat this
process on the opposite rail.
18
A
16
17
16
17
This metal hook
faces upward
MAKE SURE ALL BOLTS ARE
TIGHT BEFORE PROCEED-
ING TO TRUSS ASSEMBLY
W A R N I N G
Model: PVLS-316
17’ Single Vantage Deluxe Ladder Stand
Customer Service Department 1-866-972-6168
www.primaltreestands.com
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
©2020 (rev. 1/20)
