2/5
CONNECTION WITH THE SIMPLE CONNECTOR BETWEEN
FLEXILIGHT
1.
Cut a 7cm section from the heat shrink tube, at least, and place it in one
of the thread.
2. Enter the pins of the simple connector inside the cable of the luminous
thread.
3.
Centre the heat shrink tube with the simple connector and apply heat
until it remains completely sealed.
simple connector
shrink tube
1
2
3
End cap
THE CUT
•
Cut the luminous thread exclusively along the crops marks.
•
To avoid possible short-circuits, make sure that the copper wire is cut
clearly.
USE
•
Warn the luminous thread by connecting it to the network before giving
shape to the design. Unplug it while you are applying the shape desired.
• Do not use the metal cable, which can be conductive, to tie the luminous
thread.
•
Make sure that the luminous thread does not make contact with any
flammable material or that can be melting.
• Ensure that there is an appropriate ventilation around the luminous
thread, do not cover or install the luminous thread in an enclosed area.
• Do not dip the luminous thread under the water.
•
Once the installation is planned, it is recommended that qualified staff
check it out.
•
Throw away the product in the right place to do so.
YOUR LED LUMINOUS THREAD WORKS BETTER IF:
•
Do not expose it directly to sunlight. UV radiation destroys the PVC cove
-
rage of your luminous thread.
•
If it is operated with supply of stable flow, changes in the voltage dama
-
ge or shorten the useful life.
•
It is used in a neutral chemical environment. Strong acids, alkaline, radio
-
active, etc Damage the PVC coverage.
INSTRUCTIONS FOR ITS USE.
THE CUT OF THE LUMINOUS THREAD
1.
Cut only the cable along the crops marks indicated.
2.
To avoid possible short-circuits, make sure that the cut of the cables has
been done cleanly- Bend the luminous thread from the left to the right and,
after that, cut the copper cable which edges.
3. Cover the end of the luminous thread with a end cap which is included,
seal it with silicone, tie it with a flange (no included) for its totally insulation.
The other extreme of the luminous thread can be linked by a power cable
(included), which has been also sealed to get the perfect tightness.