Pride VOGUE Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 44

Pride VOGUE Скачать руководство пользователя страница 24

24

www.pridemobility.com

Vogue

I V . C O M F O R T A D J U S T M E N T S

Seat Angle (Dump) Adjustment

Your seat may be equipped with mechanism that allows

you to adjust the seat angle (dump) from -5° to +10° in 2.5°

increments.

To adjust the seat angle (dump):

1. Remove the occupant from the power chair.
2. Remove the seat angle adjustment bolt. See figure 12.
3. Adjust the seat to the desired angle.
4. Reinstall the seat angle adjustment bolt.

Seat Width Adjustment

You can adjust the seat width from 40.6 to 50.8 cm.

To adjust the seat width:

1. Remove the seat cushion.
2. Loosen the armrest receiver hardware. See figure 13.
3. Reposition the armrest receiver to the desired seat width.
4. Tighten the armrest receiver hardware.
5. Adjust the width of the other armrest if necessary.
6. Replace the seat cushion.

Leg Rest Width Adjustment

You can adjust the leg rest width from 40.6 to 50.8 cm.

To adjust the leg rest width:

1. Remove the seat cushion.
2. Loosen the leg rest receiver hardware. See figure 14.
3. Reposition the legrest receiver to the desired seat width.
4. Tighten the leg rest receiver hardware.
5. Adjust the width of the other leg rest if necessary.
6. Replace the seat cushion.

Figure 13. Seat Width Adjustment

Figure 14. Leg Rest Width Adjustment

Figure 12. Seat Angle (Dump) Adjustment

«
...
22
23
24
25
26
...
»

Содержание VOGUE













































Отзывы:

Нет отзывов