Pride VivaLift, Руководство пользователя

Страница: 4 / 8

4
Y
OUR
V
IVA
LIFT!
®
P
OWER
R
ECLINER
Figure 3. Chair Assembly - Power Transformer, Cords, and Connections
FABRIC CARE INSTRUCTIONS
The fabric covering this piece of furniture is very durable for everyday living. Clean with only water-based
shampoo or foam upholstery cleaner. Do not over wet. Do not use solvents to spot clean. Lightly scrub-
bing will help with any tougher spots that may have developed. Always check a small spot of fabric in
an area that is unseen to be sure the cleaning agent being used will not discolor or fade the fabric’s
fi nishing. Let the chair air dry and vacuum for the best result.
CHAIR ASSEMBLY
Once the chair has been removed from the box, you’ll notice the back is lying on the top of the seat.
Follow the steps below:
1. Some models have back wings that attach to the back. When unpacking your chair you will fi nd
these back wings packed in the back of the chair base. Unpack the back wings and set them aside
for later installation.
2. Locate the plastic bag that contains the power transformer, power cord, and the hand control. This
can be done by turning the base over on its arms. You will see the plastic bag tied to the inside of
the unit. Carefully cut the ties that hold the bag and remove it. Dispose of the ties and bag properly.
3. Remove the hand control from the plastic bag and connect it to the female plug located in the rear
of the chair. See fi gure 3.
LITHIUM ION
BATTERY PACK
HAND CONTROL
CONNECTOR
HEADREST
CONTROL
CONNECTORS
LUMBAR
SUPPORT
CONNECTORS
POWER
CORD