22
Victory Viper
I V . Y O U R V I C T O R Y V I P E R
Anti-tip Wheels
The anti-tip wheels are an integral and important safety feature designed to help prevent your scooter from
tipping rearwards on an incline. They are bolted to the frame at the rearmost part of your scooter. See figure 9.
WARNING! Do not remove the anti-tip wheels or modify your scooter in any way that is not
authorised by Pride.
WARNING! The anti-tip wheels may interfere with the smooth transition of your scooter when
climbing up or down a kerb.
Main Circuit Breaker (Reset Button)
When the voltage in the batteries becomes low or your scooter is heavily strained because of excessive
loads, the main circuit breaker may trip to protect the motor and electronics from damage. When the
breaker trips, the entire electrical system shuts down.
n
The main circuit breaker reset button is located next to the ammeter. See figure 9.
n
The reset button pops out when the breaker trips.
n
Allow a minute or so for the electronics to rest.
n
Push in the reset button to reset the breaker.
n
If the breaker trips frequently, you may need to charge the batteries more often or have your authorised
Pride provider perform a load test on the batteries.
Fuses
There is a fuse located on each side of the rear section, to protect the controller if any of the lights short out.
The fuses are part of the rear light assembly located on the underside of the shroud. To replace a fuse, first
remove the rear shroud. Lift the rubber cap that opens the fuse box and replace the old fuse with a 2-amp
fuse.
NOTE: Fuses used on the Victory Viper are the same type as used in automobiles.
