Pride Sundancer, Руководство пользователя

Страница: 11 / 30

11 Sundancer
Your Sundancer is a motorized electric Scooter designed to enhance your personal mobility. It is an indoor/
outdoor Scooter that was designed to travel primarily on smooth surfaces such as sidewalks, roads, parking lots,
floors, and driveways. For easy transportation or storage, you can disassemble your Sundancer into 7 components.
See figure 5. To decrease the rear section weight or to charge your batteries while your Scooter is disassembled,
you can also remove the utility tray and its subcomponents from the rear section. For further information on
disassembly, see VIII. “Disassembly and Assembly.” For further information on charging your batteries while your
Scooter is disassembled, see V. “Batteries and Charging.”
I V . D E S C R I P T I O N
Figure 5. Sundancer Components
CONTROL CONSOLE ASSEMBLY
The control console assembly located on the front section houses all of the controls you need to operate your
Sundancer. See figure 6.
BATTERIES
REAR SECTION FRONT
SECTION
SEAT
REAR SHROUD FRONT BASKET
WARNING! Do not expose the control console assembly to moisture. In the event it does become
exposed to moisture, do not attempt to operate your Sundancer until it has thoroughly dried.
Light Switch (Optional)
This switch enables you to control your Sundancer’s headlight and running (rear red) lights.
n Press this switch once to turn on the lights.
n Press it again to turn off the lights.
Throttle Control Lever
This lever allows you to control the forward and the reverse speed up to the maximum speed you preset on the
speed adjustment dial. For instructions on how to operate your Sundancer’s throttle control, see VI. “Operation.”
Horn Button
This button activates a warning horn.
n Ensure the key is fully inserted into the key switch and push the horn button to sound the horn.
Battery Condition Meter
When your Sundancer’s key is fully inserted, this meter indicates the approximate battery voltage strength. For
further information on battery charging, see V. “Batteries and Charging.”