Pride QUANTUM JAZZY SERIES, Руководство пользователя

Страница: 24 / 44

24 www.pridemobility.com Quantum Jazzy 1420 Series
V . C O M F O R T A D J U S T M E N T S
11. Reinstall the ball detent pin into each seat tower.
12. Reinstall the shroud.
13. Reinstall the trapeze bars and secure with the
quick-release pins.
14. Reinstall the seat.
NOTE: Make sure the seat latch safety is flipped
down before using the power chair seat.
15. Plug the controller connector(s) into the electron-
ics tray.
Seat Position Adjustment
You can move the seat forward or rearward by chang-
ing the extrusion mounting position.
To change the seat position:
1. Turn off the power to the controller.
2. Unplug the controller connector(s) from the elec-
tronics tray.
3. Remove the seat from the power base.
4. Remove both extrusions from the bottom of the seat.
5. Reposition the extrusions on a different set of
mounting holes. You must move both extrusions
the same number of holes either forward or back-
wards. See figure 15.
6. Fasten the extrusions back onto the bottom of the seat.
7. Reinstall the seat.
8. Plug the controller connector(s) into the electron-
ics tray.
Manual Recline Seatback Adjustment
If your power chair is equipped with a reclining seat,
you can adjust the seatback angle with the seatback
release lever. The lever is located on the right side of
the seat base.
To adjust the seatback angle:
1. Pull up on the seatback release lever.
2. Move the seatback down or up to the desired position.
3. Release the lever.
SEAT MOUNTING HOLES
Figure 15. Seat Position Adjustment