Pride Pursuit XL, Руководство пользователя

Страница: 21 / 44

21
Pursuit XL www.pridemobility.com
I I I . Y O U R S C O O T E R
Hi-Lo Switch
This switch toggles the scooter’s speed between HI
and LO.
Toggle the switch forward (HI) and your scooter’s
maximum speed is 8.5 mph (13.7 km/h).
Toggle the switch backward (LO) and your
scooter’s maximum speed is 4.25 mph (6.8 km/h).
Handbrake Lever
This lever provides you with emergency stopping
power. When in motion, release the throttle control
lever and gently squeeze the handbrake lever to come
to a stop.
The handbrake can be locked and used as as a parking
brake by squeezing the handbrake lever fully and
moving the brake lock to the locked position.
See fig-
ure 5 . To release the brake lock, fully squeeze the
handbrake.
WARNING! The handbrake is
intended for use as an emergency
brake and/or parking brake only.
Off-board Charger Port
The off-board charger power cord plugs into this port
during battery charging. The off-board charger port
will be located on the tiller.
See figure 6 .
Electrical System Fuses
Your scooter is equipped with a series of electrical
system fuses, which help protect the off-board charg-
ing system, key switch, and lighting system from
receiving an overload of electrical current. These
fuses are the same type used in automobiles and are
located in a compartment on the tiller.
See figure 7 .
NOTE: Keep all electrical areas clean and free of
moisture and foreign material.
Figure 6. Off-board Charger Port (Tiller Mounted)
Figure 7. Tiller Console Fuses
OFF-BOARD
CHARGER PORT
KEY SWITCH
OFF-BOARD CHARGER
REAR TAIL LIGHTS
LOWER HEADLIGHT
RIGHT TURN SIGNAL
LEFT TURN SIGNAL
Figure 5. Handbrake Lever and Brake Lock (In The
Locked Position)
BRAKE LOCK
HANDBRAKE LEVER